0086-571 88220653- hzpt@hzpt.com
Eitemau 0

Amnewid Siafft PTO O Gyfres Weasler 35

Amnewid Siafft PTO O Gyfres Weasler 35
The 35 series Yoke & Tube Assembly is a reliable PTO drive shaft yoke that is made to last. This PTO yoke features a 1-2/9 in. square bore for easy connection.

categori:
Cael Dyfyniad

Amnewid Siafft PTO O Gyfres Weasler 35

Amnewid Siafft PTO O Gyfres Weasler 35

The 35 series Yoke & Tube Assembly is a reliable PTO drive shaft yoke that is made to last. This PTO yoke features a 1-2/9 in. square bore for easy connection.

  • Shaft Length: Centerline (Center of yoke ear hole to the back of tube) 34-2/3 in.
  • Tube Outer Diameter: 2-1/9 in.
  • Tube Inner Diameter: 1-2/9 in. square
  • PTO drive shaft yoke operates at 108 HP/81 kilowatts @ 1000RPM or 70 HP/52 kilowatts @ 540 RPM for efficiency
  • PTO yoke weight: 12.06 lb.

What equipment will the driveline be used for? 

If you know which piece of equipment the power train will be used for and want to replace the whole power train, recognition is a fast two-step process:
Just select the equipment category, and then select the pipe shape (see the figure below) and length of the driveline to be replaced.
If you need to replace driveline components, refer to the following identification process.

What are the various driveline components?

1. The tractor yoke- PTO assembly starts with this type of yoke. It is connected to the tractor and used to connect the power train. There are two main types of tractor yokes. The first type is a spring lock, which uses a spring-loaded collar to connect and release the yoke. The second type is a quick to disconnect, which uses a pushpin mechanism to connect.
The tractor yoke can also be designated as 6-spline, 20-spline, or 21-spline, representing how it matches to the connection on the tractor.  This can be identified by counting the notches on the inside of the yoke collar.
2.  Cross and Bearing Kit- This is a u-joint that connects the yokes in the PTO assembly.  The cross and bearing kit will either have a snap ring located internally in the bushing or located externally, meaning it can be found in the ears of the yoke.
3. Shaft Yoke- Using a cross and bearing kit, this connects the tractor yoke to the driveline shaft.
4. Shaft- The shaft is the metal rod at the core of the driveline providing its length and connecting the yoke attachments.
5. Tube- The shaft runs inside this metal cylinder adding reinforcement to the driveline
6. Tube Yoke- Attached to the end of the tube, this yoke connects the driveline to the implementation using a second cross and bearing kit.
7. Implement Yoke- This connects the driveline to the machine or device being maneuvered by the tractor.
8. Guard- A hard plastic covering is placed around the driveline to prevent damage during operation.

Is the Driveline North American or Metric?

The simplest way to figure out whether a PTO is North American or metric is to determine the shape of the tubing and shafting.  A PTO is domestic if the tubing/shafting is square, rectangle, hex, or splined.  If the tubing/shafting is a bell, lemon, or star-shaped, then it is metric.  There are two types of metric drivelines: German-style (Walterscheid brand) and Italian style (Bondioli & Pavesi).  The German-style shafting/tubing has lemon and star profiles while the Italian has a bell-shaped design.

What series is the power train?

The exact way to determine which series of PTO to use is to take two measurements of the spider and bearing kit on the tractor end of the driveline. Use a caliper to measure the outer diameter of the universal joint cover, which is the same as measuring the inner hole of the yoke ear.

Rhannau Siafft PTO

▎35N / 2200 Series PTO Driveline Parts


59Hp@540rpm
111Hp@1000rpm
Rhan
Nifer
Cwpan
diamedr
Hyd
(B)
Snap
Ring
Cyfres math
2-2275 1.250 3.219 y tu allan i 35N / 2200
2-2276 1.250 3.219 y tu allan i 35N / 2200 zerk in cap
200-3500 1.250 3.219 y tu allan i 35N / 2200
200-3501 1.250 3.219 y tu mewn 35N / 2200

▎35N / 2200 Square or Rectangular Parts

Bar Yoke # Siafft Solet Manyleb OD Llawes Sgwâr Yoke Tiwb
6 Cyfres Sgwâr Neu Rannau Hirsgwar 6 Cyfres Sgwâr Neu Rannau Hirsgwar 6 Cyfres Sgwâr Neu Rannau Hirsgwar
6 Cyfres Sgwâr Neu Rannau Hirsgwar
Shield Tarian Gan Hyd ID Bearing Tarian
902-2548 921-1200 48 2.050
69-2248 56-2200 60 2.050

▎35N / 2200 Splined Parts

Bar Yoke # Siafft Solet Manyleb OD Llawes Sgwâr Yoke Tiwb
6 Cyfres Sgwâr Neu Rannau Hirsgwar 6 Cyfres Sgwâr Neu Rannau Hirsgwar
301-3500 404-2120 1.375-20 spline 502-3500 701-3500
302-3500 404-2720 1.6875-20 spline 505-3500 704-3500
6 Cyfres Sgwâr Neu Rannau Hirsgwar
Shield Tarian Gan Hyd ID Bearing Tarian
902-2548 921-1200 48 2.050
69-2248 56-2200 60 2.050

35N / 2200 Series Quick Disconnect Yokes

Iau Datgysylltu Cyflym 6 Cyfres

Rhif Rhan diamedr Nifer y Splines Hyd CE QD Type
101-3521 1.375 21 5.125 mwclis
22-2312 1.375 6 4.750 pin
101-3506 1.375 6 5.125 mwclis
101-3520 1.750 20 6.125 mwclis
35N / 2200 Series Hex QDs
102-3518 1.125 4.750 pin

35N / 2200 Series Clamp Yokes

Iau Clamp 6 Cyfres

35 / 2200 Iogau Clamp Splined
Rhif Rhan diamedr Nifer y Splines Nodiadau
35351-1011 1.25 15 splîn
807-3521 1.375 21 splîn
807-3506 1.375 6 splîn
22-1140 1.375 6 splîn
22-1105 1.375 21 splîn
35191-2256 1.53 23 splîn
807-3520 1.750 20 splîn
807-3527 1.750 27 splîn
35N / 2200 Round Clamp Yokes
Rhif Rhan diamedr Allweddair Nodiadau
35011-2029 1.375 . 375 darfod
35351-1010 1.375 . 375 ymyrryd
211U9 1.50 . 375 ymyrryd
35191-1788 1.50 . 375 rownd
35N / 2200 Hex Clamp Yokes
Rhif Rhan diamedr ce Hyd Nodiadau
35351-1001 1.125 3.00 clampio

35N / 2200 Cyfres Bores syth

6 Cyfres Syth Bores

35N / 2200 Series Round Bores

Rhif Rhan Bore allweddol (ce) Hyd
800-3516 1.00 . 250 4.250
Y324 1.25 3.5
806-3520 1.250 .250/.312 4.250
806-3522 1.375 .312/.375 4.250
800-3523 1.4375 . 375 4.250
800-3524 1.500 . 375 4.250
800-3526 1.625 . 375 4.250
800-3528 1.750 . 375 4.250

35N / 2200 Series Splined Bores

Rhif Rhan diamedr Splines (S) Length
Y311 1.375 6 3.00
801-3506 1.375 6 4.250
801-3521 1.375  21 4.250
Y322 1.375  21 3.375
35331-1443 1.375  6 5.25
Y345 1.5  17 2.4375
35011-1153 1.5  23 4.250

35N / 2200 Series Hex Bores

Rhif Rhan diamedr ce Hyd Math Clamp
35011-2193 1.125 dim

▎35N / 2200 Series iau

35N / 2200 Series H Yokes
Ieuau 6 Gyfres Rhif Rhan Hyd
14061-1588 1.875
35N / 2200 Series Flange Yokes
35N / 2200 Series Shear Bolt Yokes
6/0600 Cyfres Flange Yokes

 

Siafft PTO ar gyfer Bocs Gêr Amaethyddol

Mae offer amaethyddol fel tractorau, cyfuno, a chynaeafwyr yn defnyddio'r Siafft PTO. These components are subjected to high loads and stress, and it is vital to find out why they failed in the first place. Constant shaft compression can damage connecting shafts and even the tractor and implement. A PTO shaft for an blwch gêr amaethyddol yn rhan annatod o declyn neu dractor amaethyddol. Ac mae siafft PTO ar gyfer y blwch gêr amaethyddol wedi'i sicrhau gyda tharian diogelwch ar y ddau ben a gellir ei ddarganfod ar offer a thractorau. Gellir weldio siafft PTO i ben y gyriant trwy ddefnyddio cymal cyffredinol, tra gellir weldio'r siafft gefn yn uniongyrchol i'r tractor.

Siafft PTO a Bocs Gêr

categori:

cynhyrchion Categori

diwydiannau rydyn ni'n eu gwasanaethu

Rydym yn addo y byddwn yn cynnig y pris gorau yn ôl yr ansawdd uchel mewn llestri! Rydym hefyd yn derbyn archeb arbennig am y cynhyrchion. Os oes gennych ddiddordeb yn ein cynnyrch. Peidiwch ag oedi cyn rhoi gwybod i ni. Rydym yn falch o roi'r wybodaeth fanwl i chi. Rydym yn addo y byddai ein cynnyrch yn ddiogelwch ac o bris rhesymol o ansawdd uchel. Os oes gennych ddiddordeb yn ein cynnyrch, cysylltwch â ni asap.Rydym yn ddiffuant yn chwilio am eich cydweithrediad.

Mae'r rhan fwyaf o'n cynhyrchion yn cael eu hallforio i Ewrop neu America, yn gynhyrchion safonol ac ansafonol sydd ar gael. Gallwn gynhyrchu yn unol â'ch llun neu sampl. Gall deunydd fod yn safonol neu yn unol â'ch cais arbennig. Os dewiswch ni, rydych chi'n dewis dibynadwy.

baner odm oz hzpt